Skip to content
By Janet H., Owner, Janet Media GroupPublished How we research

Compare

Clek Liing vs Nuna PIPA RX

Two premium infant seats with nearly identical hardware. The decision comes down to four pounds of carrier weight and how steep your back seat is.

A premium infant car seat carrier on a rigid-LATCH base

Buckle & Buggy earns a commission when you buy through links on this page, at no extra cost to you. It does not change what we recommend or the order we rank things in — the criteria are published on our review methodology page, and the full terms are in our affiliate disclosure.

The verdict

Buy the Nuna PIPA RX if you will carry the seat; buy the Clek Liing if your vehicle's back seat is awkwardly sloped. The PIPA RX carrier is 7.6 lb without the insert or canopy against the Liing's 9 lb, and that difference is felt every single time you lift a baby out of a car — a newborn plus carrier is already around 16 lb, and it grows from there. The PIPA RX also goes slightly further, to 32 lb against the Liing's 30.

The Liing's answer is its load leg, which has 13 positions against the adjustment range of a conventional leg, and a rigid LATCH attachment. On a vehicle seat with an unhelpful slope — and plenty of modern cars have one — that adjustability is what gets the recline angle correct without wedging a rolled towel under the base. If you have tried to install an infant seat in your car before and found yourself fighting the angle, the Liing is the one that solves it. Both seats install baseless with European belt routing, which neither makes nor breaks the decision because both do it well.

Our ranking — Clek Liing vs Nuna PIPA RX
#ProductBest forOur scorePrice
1
No image

Nuna PIPA RX with RELX base

The infant seat with the most structural hardware in the category — steel load leg, anti-rebound panel and rigid LATCH — and the lightest carrier of the seats we looked at.

Most crash-management hardware8.9out of 10
2
Clek Liing

Clek Liing

A 13-position load leg and rigid LATCH make this the seat that copes with the vehicle seats other bases fight — at the cost of the lowest weight ceiling here.

Awkward vehicle seat angles8.4out of 10
$599.99 · Amazon

#ad commission · as of October 19, 2026

3
No image

Chicco KeyFit 35

The infant seat we would hand a first-time parent: a 4 lb minimum, a bubble level and a belt-tensioning system that makes a correct install hard to get wrong.

Most newborns8.8out of 10

Rows link to the full assessment further down this page. Scores are our own editorial ratings against the criteria on our methodology page — they are not crash-test results and not a NHTSA or IIHS rating.

What is the same

These two are closer than almost any other pairing on this site, which is why the comparison is worth doing carefully.

  • Both meet the same federal standard, like every other infant seat on sale in the US, including the cheap ones.
  • Both have a load leg, the brace that runs from the base to the vehicle floor and limits rotation in a frontal impact.
  • Both use rigid LATCH, which clicks onto the vehicle anchors rather than hooking on via webbing.
  • Both top out at 32 in of height, and height is what most babies hit before the weight limit on either seat.
  • Both install without the base using European belt routing — Nuna states the shell belt path needs no base at all, and Clek builds the same rear routing into the Liing.
  • Both are expensive. If the premium is the issue, the Chicco KeyFit 35 is the third pick here for exactly that reason.

Head to head

Every figure is the published one, read from Nuna's and Clek's own product pages on 17 October 2026.

Published specifications
Nuna PIPA RXClek Liing
Range4-32 lb, up to 32 inBirth to 30 lb or 32 in, whichever comes first
Carrier weight7.6 lb without insert or canopy9 lb
Load legSteel load leg13 positions
Anti-reboundAnti-rebound panel on the baseNot published in the same terms
LATCHRigid LATCHRigid LATCH
Base recline4 recline positionsAdjusted via the load leg
Baseless installYes — European belt routing, stated as suited to taxisYes — European belt path

The row that decides most purchases is carrier weight. A 1.4 lb difference sounds trivial written down and is not trivial in practice, because the carrier is the part you lift out of a low car seat at an awkward angle, often several times a day, often one-handed. Over a year the PIPA RX is the kinder of the two on your back.

The row that decides the rest is the load leg's adjustment range. Nuna solves recline with four positions on the base; Clek solves it with thirteen on the leg. Both approaches work in a normal car. In a car with a deeply sloped or unusually short rear cushion, Clek's approach has more room to move, which is precisely the problem the Liing is known for solving.

The seats in detail

01 — Most crash-management hardware

Nuna PIPA RX with RELX base

Nuna

No image
Our score8.9
Install9.6
Fit range8.2
Vehicle fit9.0
Daily use9.4
Value6.4
Check price on Amazon

#ad We may earn a commission · Amazon shows the current price

The infant seat with the most structural hardware in the category — steel load leg, anti-rebound panel and rigid LATCH — and the lightest carrier of the seats we looked at.

Two things separate the PIPA RX from cheaper seats, and neither is marketing. The first is the load leg: a steel strut that braces from the base to the vehicle floor, which Nuna states reduces forward rotation by up to 90 percent. The second is rigid LATCH, which bolts the base to the anchors instead of tensioning a strap, so the install is essentially unambiguous. Add the anti-rebound panel and the RELX base's four recline positions and you have the seat that copes best with an awkward vehicle seat angle. The carrier is 7.6 lb, the lightest we recorded, which matters more than parents expect at month five. It is also one of the most expensive infant seats sold, and its 32 lb weight ceiling is lower than the KeyFit 35's — irrelevant in practice, because height runs out first. Note it also installs baseless with European belt routing, which makes it a genuine option for rideshares.

What works

  • Load leg plus anti-rebound panel is the most crash-management hardware in the category
  • Rigid LATCH removes most of the guesswork from the install
  • Lightest carrier we recorded at 7.6 lb
  • Four base recline positions handle steeply sloped vehicle seats

What to weigh

  • Among the most expensive infant seats on the market
  • 32 lb ceiling is lower on paper than several cheaper seats
  • Rigid LATCH bases do not fit every vehicle anchor layout
Published specifications for the Nuna PIPA RX with RELX base, with the source each figure was read from
SpecPublished figureRead from
Rear-facing range4-32 lb, up to 32 inNuna product page
Carrier weight7.6 lb without insert or canopyNuna product page
Base featuresSteel load leg, anti-rebound panel, rigid LATCH, 4 recline positionsNuna product page
Baseless installYes — European belt routingNuna product page

Verified as currently sold and checked against NHTSA's recall record on 2026-09-26; no recall named this model. Recalls apply to specific manufacture-date ranges, so check the date stamp on your own unit. We do not print a star rating for this seat: NHTSA publishes an Ease-of-Use rating, and we would rather send you to the source than reprint a figure we could not read first-hand. Specifications come from the manufacturer or retailer listing.

02 — Awkward vehicle seat angles

Clek Liing

Clek

Clek Liing
Our score8.4
Install9.5
Fit range7.0
Vehicle fit9.6
Daily use8.0
Value6.0
$599.99 · View on Amazon

#ad We may earn a commission · Price as of October 19, 2026

A 13-position load leg and rigid LATCH make this the seat that copes with the vehicle seats other bases fight — at the cost of the lowest weight ceiling here.

The Liing exists for the install problem nobody warns you about: vehicle seats that slope, and center positions with an uneven floor hump. Thirteen load-leg positions plus rigid LATCH give you far more adjustment than the usual two or three, which is why this seat solves cars where other bases simply will not sit at a legal recline angle. Clek states the load leg reduces crash forces by up to 40 percent. The costs are real: birth to 30 lb or 32 in is the shortest range in this roundup, the carrier is 9 lb, and the price sits at the top of the market. Buy it if you have already discovered that your car is difficult, or if you need the center seating position to work. If your install is easy, you are paying for adjustment you will not use.

What works

  • 13-position load leg fits vehicle seats that defeat other bases
  • Rigid LATCH gives a near-unambiguous install
  • Genuinely workable in a center seating position

What to weigh

  • 30 lb / 32 in is the shortest range in this roundup
  • Top-of-market price
  • 9 lb carrier is heavy for the category
Published specifications for the Clek Liing, with the source each figure was read from
SpecPublished figureRead from
RangeBirth to 30 lb or 32 in, whichever comes firstClek product page
Load leg13 positionsClek product page
AttachmentRigid LATCHClek product page
Carrier weight9 lbClek product page

Verified as currently sold and checked against NHTSA's recall record on 2026-09-26; no recall named this model. Recalls apply to specific manufacture-date ranges, so check the date stamp on your own unit. We do not print a star rating for this seat: NHTSA publishes an Ease-of-Use rating, and we would rather send you to the source than reprint a figure we could not read first-hand. Specifications come from the manufacturer or retailer listing.

03 — Most newborns

Chicco KeyFit 35

Chicco

No image
Our score8.8
Install9.4
Fit range8.6
Vehicle fit8.8
Daily use8.2
Value9.2
Check price on Amazon

#ad We may earn a commission · Amazon shows the current price

The infant seat we would hand a first-time parent: a 4 lb minimum, a bubble level and a belt-tensioning system that makes a correct install hard to get wrong.

The KeyFit line has been the default recommendation in this category for years, and the 35 is the version worth buying because the taller shell buys you months of extra use over the older KeyFit 30. It starts at 4 lb with the newborn positioner, which covers most preemie discharges, and tops out at 35 lb or 32 in — and like every infant seat, height is what your baby will actually hit first. What earns it the top slot is install feel rather than any spec: the base has a bubble level for the recline angle and a belt-tightening mechanism you crank rather than yank, so getting under the one-inch movement limit does not take three attempts. The trade-off is that the carrier is on the heavier side of the category and the canopy is smaller than the premium seats below. If you want the lowest-chemical version, the ClearTex fabrics carry no added flame retardants.

What works

  • Starts at 4 lb, so it fits most newborns straight out of hospital
  • Bubble level plus a cranking belt tightener makes a tight install repeatable
  • Tall shell gets you closer to the 32 in limit than the older KeyFit 30
  • ClearTex versions drop the added flame retardants

What to weigh

  • Carrier is heavier than the premium lightweight seats
  • Canopy is small next to Nuna or UPPAbaby
  • No load leg or anti-rebound bar at this price
Published specifications for the Chicco KeyFit 35, with the source each figure was read from
SpecPublished figureRead from
Rear-facing range4-35 lb, up to 32 inChicco product page
Newborn positionerRequired 4-11 lbChicco product page
HarnessNo-rethread, Easy-Extend headrestChicco product page
Fabric optionClearTex — no added flame retardantsChicco product page

Verified as currently sold and checked against NHTSA's recall record on 2026-09-26; no recall named this model. Recalls apply to specific manufacture-date ranges, so check the date stamp on your own unit. We do not print a star rating for this seat: NHTSA publishes an Ease-of-Use rating, and we would rather send you to the source than reprint a figure we could not read first-hand. Specifications come from the manufacturer or retailer listing.

Which one fits your car and your stroller

Two practical constraints usually settle this before the specs do, and both are worth checking before you order.

  1. 1.Your vehicle's rear seat. Load legs need floor to brace against. If your back seat sits over a storage well or a hybrid battery hump, read your vehicle manual on what the floor may be loaded against — some manufacturers restrict it. This applies to both seats equally.
  2. 2.Your stroller. Infant seats attach to strollers through brand-specific adapters, and the adapter you need depends on the stroller, not the seat. Check the stroller maker's own compatibility list for your exact carrier before you buy either, and see stroller and car seat adapter compatibility.
  3. 3.Where the seat has to go. Both are premium carriers with substantial bases; neither is a narrow seat. If an infant seat has to share a row with two other restraints, start at how many car seats fit in my car.

What happens at the end of the infant stage

Both of these seats end somewhere around the first birthday for an average-sized baby — 30 or 32 lb, or 32 in of standing height, whichever arrives first, and for most babies it is the height. That is normal for the category and it is the reason to think about the infant seat as a two-year purchase rather than a ten-year one. The next seat is a convertible that stays in the car, and the rear-facing stage continues in it.

If spending this much on a seat with that short a life bothers you — and it is a fair objection — the alternative is to skip the carrier and start with a convertible. You lose the click onto a stroller frame and the ability to move a sleeping baby without waking them, which are the two things infant seats genuinely buy you. We weigh it up in infant car seat vs convertible.

Frequently asked questions

Is the Clek Liing or the Nuna PIPA RX better?

The Nuna PIPA RX for most families, because the carrier is 7.6 lb without the insert or canopy against the Liing's 9 lb and it goes to 32 lb rather than 30. The Clek Liing is the better choice if your vehicle's rear seat is steeply sloped, because its load leg has 13 positions and can set a correct recline angle where a four-position base struggles.

Do both seats have a load leg?

Yes. Nuna publishes a steel load leg plus an anti-rebound panel on the RELX base; Clek publishes a 13-position load leg. Both also use rigid LATCH, which clicks straight onto the vehicle anchors. Check your own vehicle manual before using a load leg over a rear floor storage well.

Can both be installed without the base?

Yes, and both do it properly. Nuna's product page states the PIPA RX installs directly using the belt path on the shell with no base necessary and calls it suited to taxis and city living. Clek builds a European belt path into the Liing. Our baseless infant car seat roundup covers the technique.

How long will my baby fit in either seat?

The PIPA RX runs 4-32 lb up to 32 in; the Liing runs from birth to 30 lb or 32 in, whichever comes first. For most babies the 32 in height limit arrives first, somewhere around the first birthday. After that the child moves to a convertible seat and keeps rear-facing in it.

Is a premium infant seat safer than a cheap one?

No. Every infant seat sold in the US meets the same federal crash standard. What a premium seat buys is hardware that limits rotation, a lighter carrier, better fabrics and in some cases an easier install in a difficult vehicle. Those are real benefits, but a correctly installed Chicco KeyFit 35 is a correctly installed car seat.

Which one works with my stroller?

That depends on the stroller, not the seat. Both brands are supported by adapters from most major stroller makers, but the adapter is model-specific. Check the stroller manufacturer's own compatibility list for your exact carrier before buying either piece.